lkpeazy.blogg.se - Homeseer z-wave

I don’t need a fancy remote control - I want reliable automation of functions, and it does decently in that domain. I recently made the HS4 conversion, and like you, the UI in underwhelming. In addition to the hardware, I probably have spent about $400 on plugins etc… In general. I have been using Homeseer for about 10 years, and we built a new house 2 years ago, and made sure it was very automation friendly. If you're using another brand of controller, be sure to check with that manufacturer to see if the central scene features are supported.I am. These features are supported by all HomeSeer systems, including HS3 software and HomeTroller controllers.

Press top or bottom of paddle 2, 3, 4, or 5 times – triggers up to 8 more different HomeSeer events.

Press and hold top or bottom of paddle – triggers 2 HomeSeer events.

Press top or bottom of paddle once – turns attached load on or off and can also trigger 2 HomeSeer events.

If no status conditions are active, wall switches automatically return to normal mode. If the door is closed but not locked, it can glow yellow. For example, if the front door is closed and locked, it can glow green. In status mode, the LED can be controlled to reflect the status of nearly anything in the home. For example, you can program the LED to glow green and red on holidays. Normal mode colors can be set once and left or can be programmed to change every day or on holidays, birthdays and other special events. In normal mode, the LED indicator glows to reflect the on/off status of each circuit using a palette of 7 possible colors. However, add it to any HomeSeer system and you'll be able to trigger up to 14 different events! Once installed, HS-WS200+ works like any other paddle-style switch and will turn the attached load on or off.

Compatible with HomeSeer (and many other) home controllers.

Supports instant status when controlled locally.Supports multi-tap and press and hold event triggers up to 5 taps (14 possible triggers).Color and blink status of LED indicator is controlled with Z-Wave commands.

Supports wireless on-off control of lighting and appliance loads.

HS-WS200+ may be used with most home controllers but should be used with HomeSeer Hometrollers for best compatibility with all features. HS-WS200+ is also designed to trigger automation events with a multi-tap operation (up to 5 taps). The switch includes RBG LED indicators which may be controlled wirelessly to suit color preferences or to reflect the changing status of other devices in your home. HS-WS200+ is a Z-Wave Plus relay (on-off) wall switch for use with most lighting and appliance loads.